Ruggedised MTP fan-outs, or harnesses, allow the direct connection of MTP® connectors to other connector types. Most commonly these are LC connectors, but we can also terminate with SC, FC, E2000, ST or any other type of fibre connector.
- 8 Fibre for 40G QSFP+ applications. Uses a 12 fibre MTP Elite Female connector with 1-4 and 9-12 connected and LC simplex/duplex.
- 12/24 fibre MTP Elite Female connector and 12/24x LC simplex/duplex connectors for QSFP applications.
- 12/24 fibre with a 12/24 fibre MTP Male connector and 12/24x LC simplex/duplex connectors for coupling to Female MTP24 trunk cables.
HIGH DENSITY CONNECTORS
LC high density simplex/duplex connectors with pull tab.
Compact LSZH cable, 3.2mm.
MTP® harnesses are manufactured in the UK using the highest quality components and 100% tested.
LOW LOSS CONNECTOR
Low loss MTP® Elite connector.
The MTP-fan out cable range offers several options from 8 to 24 fibres.
8 Channel QSFP+ MTP Fan-out
Used for 40Gb Ethernet, FiberChannel and Infiniband, 8 of the 12 fibres are used to pass 4x 10Gb channels. A single 40Gb MTP can therefore be connected directly to four 10Gb SFP+ Transceivers via LC Duplex terminations. Alternatively, this cable can connect a QSFP Transceiver into an LC fibre patch panel. Simplex LC terminations are also available.
12 & 24 Channel MTP Fan-out
Used to connect MTP®/MPO Trunk cables or active equipment directly to LC sockets, either on panels or equipment.